Serial / Lan Command Control; Serial Interface; Lan Interface - FOR-A MFR-1616 Operation Manuals

4. Serial / LAN Command Control

4-1. Serial Interface

Crosspoint switchover and tally output can be controlled via the SERIAL ports on the MFR
Series main unit or MFR GPI.

4-2. LAN Interface

The MFR Series main unit is able to connect to a third-party automatic control system via the
RJ-45 port (PC-LAN port). The TCP/IP communication protocol is supported. The control PC will
be the Client, and the MFR Series main unit will be the Server.
Server
MFR Series main unit
Client
No.1
 Basic specifications
Item
IP address (PC-LAN port)
Port number
Number of PCs
Response / Resending
Login password
Communication protocol
Command protocol
PC-LAN port
Client
No.2
192.168.1.12
(Subnet Mask: 255.255.255.0)
Setting range: 49152 to 65534 (Default: 23)
Max. 16
Wait before sending next command (Resend if the Echo is not
returned.)
None
TCP/IP, Control PC: Client, MFR-3232: Server
Crosspoint Remote Control using ASCII code.
Crosspoint Remote Control protocol
34
Web-base
d Control
Hub
Client
No.**
Description