Mode Button; Setting Button; Probe Temperature - AC Infinity CLOUDRAY T10 User Manual

PROGRAMMING
1

1. MODE BUTTON

This button cycles through each of the controller's mode: OFF, ON, AUTO (4 triggers), TIMER TO
ON, TIMER TO OFF, CYCLE (On and Off), and SCHEDULE (On and Off).
2. UP / DOWN BUTTON
Adjusts the parameters of the mode that you are in. In most modes, the up button increases and
down button decreases the setting. Holding both buttons simultaneously sets the parameters to off.

3. SETTING BUTTON

This button cycles through each of the controller's settings: DISPLAY BRIGHTNESS, F/C, CLOCK,
CALIBRATION (Temperature and Humidity), and TRANSITION (Temperature and Humidity).

4. PROBE TEMPERATURE

Current temperature that the probe is detecting. Displays "--" if no probe is plugged in. Includes a
trend indicator that signals a rise, steady, or fall in temperature within the last hour.
AUTO
6
HIGH TEMP.
LOW TEMP.
4
HIGH HUMID.
LOW HUMID.
7
5
2
AM
8
9
TO
10 ON
11
PM
3
21