Other Settings; Controller Lock - AC Infinity CLOUDRAY T10 User Manual

OTHER SETTINGS

FACTORY RESET
To reset the controller back to factory settings, hold the mode button, the up button, and the down
button simultaneously for four or more seconds. Resetting the controller will clear all user set
parameters in every controller mode and settings.
BLUETOOTH RESET
Hold the Mode and Settings buttons simultaneously for four or more seconds to clear advanced
programming in the controller. The app will disconnect from the controller and will have to be
paired again to reestablish the Bluetooth connection. All sensor data, controller programming, and
settings will be retained.

CONTROLLER LOCK

To lock the controller to prevent settings to be changed accidentally, hold the settings button for
two or more seconds. While the display locked, you will not be able to switch modes or change
any settings. You will be able to hide the screen by pressing the settings button while the controller
is locked. Holding the settings button for two or more seconds will unlock the controller.
HIDE SCREEN
The screen on the display can be hidden but all programs and settings will continue to run in the
background. This can be done by first holding the settings button to lock the controller. Once locked,
pressing the mode button will hide and unhide the screen.
JUMP TO OFF MODE
Holding the mode button for two or more seconds while in any mode or settings will automatically jump
to OFF Mode. This will not work if the controller is locked.
SET MODE PARAMETERS TO OFF
Holding the up and down button simultaneously will automatically set the parameter for the mode
you are in to OFF or 0. For trigger modes, the OFF parameter is usually located between the highest
and lowest settings point. This shortcut allows the user to quickly jump to OFF without cycling.
34