Carton Contents - KNOVA KN M-2502N Manual

CARTON CONTENTS

UNPACKING YOUR MITER SAW
WARNING
To avoid injury from unexpected starting
or electrical shock, do not plug the power cord into a
source of power during unpacking and assembly. This
cord must remain unplugged whenever you are working
on the saw.
1. Remove the miter saw from the carton.
IMPORTANT: Do not lift miter saw by the trigger switch
handle. It may cause misalignment. Lift machine by the
hand holds for transportation.
2. Place the saw on a secure stationary work surface.
Vise Clamp
Miter Saw
3. Separate all parts from the packing material. Check each
of the illustrations shown below to make certain all items
are accounted for, before discarding any packing material.
WARNING
If any part is missing or damaged, do not
attempt to assemble the miter saw, or plug in the power
cord until the missing or damaged part is correctly replaced. To
avoid electric shock, use only identical replacement parts when
servicing double insulated tools. Call 01-800-70-KNOVA (56682)
for replacement parts.
Blade Wrench
5
dust Collector
Miter Handle