Carton Contents; Know Your Compound Mitre Saw - KNOVA KN M-2500N Manual

CARTON CONTENTS

UNPACKING YOUR MITRE SAW
WARNING
To avoid injury from
unexpected starting or electrical
shock, do not plug the power cord
into a source of power during
unpacking and assembly. This cord
must remain unplugged whenever
you are working on the saw.
1. Remove the mitre saw from the carton.
IMPORTANT: Do not lift mitre saw by
the trigger switch handle. It may cause
misalignment. Lift machine by the
built-in carry hand hold.
2. Place the saw on a secure stationary
work surface.
3. Separate all parts from the packing
material. Check each of the
illustrations shown below to make
certain all items are accounted for,
before discarding any packing material.

KNOW YOUR COMPOUND MITRE SAW

Safety
Lock-Off
Button
Upper Plate
Guard
Cover
Plate
Dust
Bag
Hold-down
Clamp
Bevel
Scale
Hand Hold for
Transportation
WARNING
mitre saw, or plug in the power cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical replacement parts when servicing
double insulated tools. Call 1-800-70-KNOVA (56682) for replacement parts.
Battery Cover
Laser On/Off
Switch
Motor
Lower
Blade
Guard
Base
Positive Stop
Locking Lever
Mitre Angle
Pointer
If any part is missing or damaged, do not attempt to assemble the
Mitre Saw
Arbour
Lock
Laser Guide
Fence
Table
Mitre
Scale
Table Insert
Mitre Lock Handle
5
Hold-Down Clamp
Dust Bag
Blade Wrench
Batteries
Rear Extension Stay
ON/OFF
Trigger
Switch
Hand Hold for
Transportation
Hex Key
Mitre Table
Handle
Switch
Handle
Hold-down
Latch
Bevel Lock
Handle
Rear
Extension
Stay