Accessories And Attachments; Carton Contents; Table Of Loose Parts - KNOVA KN SCM-07A Manual

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES
WARNING
: To avoid injury:
• Use only accessories recommended for machine.
• Follow instructions that accompany accessories.
Use of improper accessories may cause hazards.
• Use only accessories designed for this machine to avoid
injury from thrown broken parts or work pieces.
• Do not use any accessory unless you have completely read
the instruction or operator's manual for that accessory.

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS
Carefully unpack the machine and all its parts, and compare
against the illustration following.
WARNING
• To avoid injury from unexpected starting, do not plug
the power cord into a power source receptacle
during unpacking and assembly. This cord must
remain unplugged whenever you are assembling
or adjusting the machine.
• If any part is missing or damaged, do not plug
machine in until the missing or damaged part is
replaced, and assembly is complete.
A
B
G H
M
C

TABLE OF LOOSE PARTS

Unpack carton; check you machine to see parts listed below:
A. Band saw
B. Stand legs A
C. Stand legs B
D. Table
E. Table Support
F. Transport handle
G. Work Stop rod
H. Work Stop
I. Belt house
J. V-Belt
K. Motor pulley with key
L. Worm gear pulley
M. Long brace
N. Short brace
O. Wheel Mounting Bracket
P. Shaft
Q. Wheels
R. Hardware bag (not shown)
D
I
N
3
x 1
x 2
x 2
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 2
x 2
x 1
x 1
x 2
E
J K
O
P
F
L
Q