Carton Contents - KNOVA KN BTS-10N Manual

CARTON CONTENTS

UNPACKING YOUR TABLE SAW
CA UTION
To avoid injury from unexpected starting
or electrical shock, do not plug the power cord into a
source of power during unpacking and assembly. This
cord must remain unplugged whenever you are work-
ing on the saw.
1. Remove the table saw from the carton.
2. Place the saw on a secure stationary work surface.
Rip Fence
Saw Blade
Legs
Table Saw
Assembly
Miter Gauge
Assembly
Handwheel
Assembly
Bottom Long
Support Brackets
3. Separate all parts from the packing material. Check each
one with the illustration on below to make certain all
items are accounted for before discarding any packing
material.
C AU T I ON
attempt to assemble the table saw, or plug in the pow-
er cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical
replacement parts when servicing double insulated
tools.
Anti-kickback
Blade Guard
Stand Parts
Hardware Bag
Top Long Support
Brackets
6
If any part is missing or damaged, do not
Pawl
Puch Stick
(located on
saw base)
Top Short Support
Brackets
Support Brackets
Riving Knife
Assembly
Blade Wrenches
(2) & Hex Key
Leg Pads
Bottom Short