Windows Me; Windows 95 And Windows 98 - Adaptec 2930U User Manual

Windows Me

Windows Me has embedded driver support for a SCSI card as part of
the installation software. When the SCSI Card 2930CU is installed
and you have restarted your computer, the Add New Hardware
Wizard window appears to guide you through the final steps.
1 When the Add New Hardware Wizard window appears, select
the top radio button to launch an automatic search for the most
suitable driver, and click Next.
Windows locates the appropriate driver for the newly-detected
SCSI card and automatically processes the installation.
The SCSI Card 2930CU is detected as
Note: If Windows is unable to find the driver, insert the
SCSI Card 2930 CD into the CD-ROM drive and direct
Windows to search the CD for the driver.
2 Click Finish to complete the installation. To verify driver
installation, see
on page 4-11.

Windows 95 and Windows 98

This section explains how to install the driver for Windows 95/98.
The driver is detected as
the SCSI Card 2930 CD is
If you are performing a first-time Windows 95/98 installation, see
the next section,
If Windows 95/98 is already installed on your system, see
the Driver When Windows 95 is Already Installed on page 4-4
Installing the Driver When Windows 98 is Already Installed on page
Note: When Windows 95/98 starts, if a New Hardware Found
dialog box displays after your SCSI Card 2930CU has been
installed, select Driver from Disk Provided by Hardware
Manufacturer. Insert the SCSI Card 2930 CD into the
CD-ROM drive and type the drive letter for your CD-ROM
drive. Then, follow the on-screen instructions.
Verifying Driver Installation – Windows 95/98/Me
PCI SCSI AHA-2930CU
aic78xx.mpd
Installing the Driver When Installing Windows
PCI SCSI AHA-2930CU
. The driver file on
.
Installing Drivers
.
95/98.
Installing
or
4-7.
4-3