Windows Me
1 Turn on the computer and insert the USB2connect CD. During
the operating system startup, the adapter is detected and
Windows searches for embedded drivers for the card.
Note: It may take longer than usual for your system to restart
because the operating system is locating and installing new
drivers.
2 If you see a message that the PCI Universal Serial Bus driver was not
located, select Automatic search for a better driver (Recommended).
Then, insert the USB2connect CD and click Next.
3 When Windows has finished copying the USB 2.0 drivers from
the USB2connect CD, click Finish.
4 Restart your computer if prompted to do so.
Installing the Windows Drivers
13