Adaptec 2930U User Manual page 18

To install internal SCSI devices
1 Ensure that each internal SCSI device has a unique SCSI ID
number between 0 and 6. Refer to the SCSI device's
documentation for instructions on setting the SCSI ID.
Note: Avoid touching the device connector pins.
2 If your computer is not already open, ground yourself on the
chassis, then turn off the computer and disconnect the power
cord. Open the computer cabinet, following the manufacturer's
instructions.
3 Mount each SCSI device in an available drive bay inside your
computer. Refer to the documentation for your computer and
SCSI devices for installation instructions.
Note: If space is limited inside your computer, you may
have difficulty connecting SCSI and power supply cables
to your SCSI devices once they're installed. Consider
completing these connections (starting with
page 3-3) before installing the devices.
Installing SCSI Devices
Step 4 on
Internal SCSI device mounted
in the drive bay
3-2