Installing Internal Scsi Devices - Adaptec 2930U User Manual

Installing SCSI Devices
In this Chapter

Installing Internal SCSI Devices

Connecting External SCSI Devices
You can connect a total of seven SCSI devices to the SCSI Card
2930CU. If you are installing more than two internal SCSI devices,
you will need an internal SCSI cable with enough connectors for all
devices.
The SCSI card, and each SCSI device (whether internal or external),
must have a unique SCSI ID. See
each device's documentation for more information.
Note: The card's SCSI ID is preset to 7 and should not be
changed.
Installing Internal SCSI Devices
You must prepare each internal SCSI device for installation. See
Preparing SCSI Devices for Installation on page A-4
instructions.
If you are connecting only external devices, skip to
External SCSI Devices on page
SCSI IDs on page A-2
3-5.
3
3-1
3-5
and refer to
for detailed
Connecting
3-1