Windows Me - Adaptec USB2Xchange User Manual

Note: Installing the drivers for the USB2Xchange adapter
before connecting and powering-on at least one SCSI device
might cause a drive load failure. This failure will show as a
yellow exclamation point beside the USB2Xchange adapter in
Device Manager.

Windows Me

When you connect the USB2Xchange adapter to your computer,
Windows Me automatically detects it. The first time you connect
the adapter, you are prompted to install the driver from the
USB2Xchange CD.
To install the Windows Me driver:
1 Ensure that Windows Me is running.
2 Plug the USB2Xchange adapter into the USB port on your
computer. Make sure the adapter is connected to a powered-up
SCSI device.
The Found New Hardware Wizard opens.
Installing the Driver
14