King Quest VQ4100 Troubleshooting Manual page 28

STANDARD OPERATION WITH DISH RECEIVER
IF YOUR RECEIVER IS NEW AND UNACTIVATED, YOU MUST COMPLETE
THE STEPS ON PAGES 22-25 FIRST!
After connecting and turning on your equipment, the Mobile Antenna Setup screen will display.
(It may take up to two minutes to display.)
Note: If the Mobile Antenna Setup screen does not display, press MENU, 6, 1, 1 on your
remote. Highlight the "Check Switch" button then press SELECT on your remote.
IN STEPS 1-5, DO NOT BLOCK THE ANTENNA'S
LINE OF SIGHT TO THE SATELLITES IN THE
SOUTHERN SKY AT ANY TIME!
1. Use the arrow buttons on your remote to
highlight the letter group that includes the
first letter of the state you are currently in.
Press SELECT on your remote.
Page 26
IMPORTANT!
If you move the antenna unit any
time during or after the scan,
you will have to repeat steps 1-5.