Second Receiver Operation - Dish And Bell Tv - King Quest VQ4100 Troubleshooting Manual

INITIAL SETUP FOR SECOND RECEIVER
1. With the antenna locked on the satellite
and the second receiver connected to the
antenna unit's AUX port coax, use your
DISH remote control and press MENU, 6, 1, 1 to
display the Point Dish screen.
2. Use the arrow buttons on the remote
to highlight "Check Switch."
Press SELECT on your remote.
3. Verify "SuperDISH" and "Alternate"
are not selected.
Verify "Test" is highlighted.
Press SELECT on your remote.
4. When test is complete, highlight "Save."
Press SELECT on your remote.
See the next page for downloading programming to the second receiver.
Page 20
4.5 Second Receiver Operation
Antenna locked on
and
receiver connected!
Receiver sold separately.