Tailgater Mode - King Quest VQ4100 Troubleshooting Manual

IF YOU ARE USING A NEW RECEIVER WITH THE KING QUEST, YOU MUST FOLLOW
THE FIRST TIME SETUP PROCEDURE STARTING BELOW.
AFTER THIS FIRST TIME PROCEDURE, YOU CAN USE "STANDARD OPERATION
WITH DISH RECEIVER" STARTING ON PAGE 26.
FIRST TIME OPERATION WITH NEW DISH RECEIVER
Go to kingconnect.com/receivers for a list of compatible DISH receivers.
MAKE SURE TO INSTALL THE BATTERIES IN THE RECEIVER'S REMOTE
CONTROL (INCLUDED WITH REMOTE CONTROL).
1. Point your receiver's remote at the front of
the receiver and press SAT.
Press RECORD.
When a number appears in the box,
verify "Continue" is highlighted.
Press SELECT on your remote.
The Portable Antenna Setup screen
will display.
Page 22
4.6

Tailgater Mode