Table of Contents
Advertisement
9.0
Working with the Key Pad in Run Mode
ENTER
In run mode the
the screen looks similar to the following:
ENTER
Press
once. The screen changes to the status screen of the relays.
ENTER
Press
again and the screen goes to the onscreen KSCOPE.
Note: The screen reverts back to normal run mode within 2 minutes.
ENTER
Pressing
screen into normal run mode.
10.0 Run Mode Screen in Distance / Level Mode
1. The graphical representation of the percentage fill of the application.
2. The instantaneous distance that the instrument is measuring at that specific time. Please note that this value can
change on each pulse.
3. The temperature, which is being measured at the transducer, if temperature compensation has been enabled.
4. The value of percentage fill of the instrument.
5. The mA output of the instrument.
6. The average Distance/Level value which is calculated.
key has an alternative function. While in run mode
Relay State
Hour
REL 1: OFF
LO
again while in the onscreen KScope screen will revert the
Dist.
mA Output:
Instant:
Temperature:
Percentage:
Cycles
0
2
2.000 m
7.20 mA
2.000 m
20°C
20.00%
Operation instruction manual | KSONIK MICRO Ultrasonic Level Transmitter 19
Dist.
2.000 m
mA Output:
7.20 mA
Instant:
2.000 m
Temperature:
20°C
Percentage:
2v
E
20.00%
E 0.4
D 13.1
G 99
P 15
15.0
m
Advertisement
Table of Contents
