Table of Contents
Advertisement
3.0
Quick Start for Level
1.
Connect up the power to the instrument described on the KSONIK MICRO face label or in the KSONIK MICRO
manual under terminal connections on page 51.
SCROLL
2.
Press
▼
3.
Use
▼
4.
Use
RUN
5.
Press
Aim the transducer at a wall about 2.000 m away and check the display. It should read the following:
If the Level reading is below 8.000 m then move the instrument closer to the wall. If the Level reading is above 8.000 m
then move the instrument away from the wall. You may now proceed and check other parameters
4.0
Quick Start For Flow
1.
Connect up the power to the instrument as described on the KSONIK MICRO face or in the KSONIK MICRO
manual under terminal connections on page 51.
SCROLL
2.
Press
▼
3.
Use
▼
4.
Use
RUN
5.
Press
Aim the transducer at a wall about 1.5 m away and check the display. It should read the following:
If the head reading is below 0.500 m or below 64.86 Lt/s then move the transducer closer to the wall. If the head reading
is above 0.500 m or above 64.86 Lt/s then move the transducer away from the wall. You may now proceed and check
other parameters.
4 KSONIK MICRO Ultrasonic Level Transmitter | Operation instruction manual
to get to the default security Code 5159 and
to select level and then press
Level
mA Output:
Instant:
Temperature:
Percentage:
to get to the default security Code 5159 and
to select level and then press
Flow:
T:
Head:
mA Output:
Instant:
Temperature:
Percentage:
ENTER
ENTER
8.000 m
17.47 mA
2.000 m
20°C
84.21%
ENTER
ENTER
64.86 Lt/S
00001513408 Lt
0.500
5.03 mA
1.502 m
20°C
6.48%
ENTER
then press
ENTER
then press
Advertisement
Table of Contents
