Dust Collection - Woodstock Shop Fox W1888 Owner's Manual

Model W1888 (For Machines Mfd. Since 10/20)
Dust.Collection
Recommended.CFM.at.Dust.Port:............... 500.CFM+
Do not confuse this CFM recommendation with the rating
of the dust collector. To determine the CFM at the dust
port, you must consider these variables: (1) CFM rating of
the dust collector, (2) hose type and length between the
dust collector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines throughout
the system. Explaining how to calculate these variables
is beyond the scope of this manual. Consult an expert or
purchase a good dust collection "how-to" book.
This. machine. creates. substantial. amounts. of. dust.
during.operation..Breathing.airborne.dust.on.a.regu-
lar.basis.can.result.in.permanent.respiratory.illness..
Reduce.your.risk.by.wearing.a.respirator.and.captur-
ing.the.dust.with.a.dust.collection.system.
Tools.Needed.
Dust Hose Adapters 1 ⁄
1
2
Dust Hose 94" x 1 ⁄ " ...........................................1
1
2
Dust Hose 4 " (not included) ...................................1
Hose Clamps 4" (not included) ................................2
Dust Collection System (not included) ......................1
To.connect.a.dust.collection.hose,.do.these.steps:
1. Fit a 4" dust hose over the dust port and secure it in
place with a hose clamp (see Figure.35).
2. Tug the hose to make sure it does not come off.
Note: A tight fit is necessary for proper
performance.
" .......................................2
Qty
Hose Clamp
Figure.35. Dust hoses attached to port.
-29-
1 ⁄ " Dust
1
2
Hose
4" Dust Hose