Controls & Components - Woodstock Shop Fox W1888 Owner's Manual

Model W1888 (For Machines Mfd. Since 10/20)
Controls.&.Components
Refer to Figures.1–3.and the following descriptions to
become familiar with the basic controls and components
of this machine. Understanding these items and how they
work will help you understand the rest of the manual and
safely operate this machine.
A.. ON/STOP.Switch: Turns motor ON when pulled out;
turns motor OFF when pressed in. Switch is disabled
when yellow key is removed.
B.. Handwheel.Locks: Lock blade height and angle
when tightened (one on each handwheel).
C.. Blade.Tilt.Handwheel: Adjusts angle of blade tilt
from 90°–45°.
D... Blade.Height.Handwheel: Adjusts blade height from
0"–3 ⁄ ".
1
8
E.. Fence:.Guides workpiece as it moves into blade
and determines angle of cut. Fence face can be
positioned for standard cutting operations, or placed
in lower position for blade guard clearance during
narrow ripping operations.
F.. Fence.Lock.Knobs:.Secure fence when tightened;
allow fence to be repositioned along fence tube
when loosened.
G.. Fence.Lock.Handle:.Locks fence when pushed down,
unlocks fence when pulled up.
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
A
Figure.1. Location of ON/STOP Switch.
Figure.2. Blade adjustment handwheels
Figure.3. Location of fence controls.
-7-
B
C
D
and locks.
E
F
G