Woodstock Shop Fox W1888 Owner's Manual page 31

30.. Place 3 ⁄ " hose clamps over each end of 3" dust
1
4
hose, then attach 3" dust hose to dust chute and
dust port inside cabinet (see Figure 32).
31. Attach dust hose adapter to each end of dust hose
(see Figure.33).
32. Slide one adapter onto 1
snugly (see Figure.34).
33. Attach dust hose to dust hose support then insert
dust port into rear of blade guard assembly (see
Figure.34).
⁄ " dust port until it fits
1
2
-28-
Model W1888 (For Machines Mfd. Since 10/20)
Figure.32. Dust hose connected inside
cabinet.
Adapters
Figure.33. Adapters attached to dust hose.
1 ⁄ " Dust Port
1
2
Blade
Guard
4" Dust
Port
Figure.34. Dust hose attached to saw,
hose support, and blade guard dust port.
3 ⁄ "
1
4
Hose
Clamp
Hose Support
1 ⁄ "
1
2
Dust Port