Lamp & Fuse Replacement; Lamp Replacement - ADJ VIZI BEAM 5RX User Manual

Vizi Beam 5RX Lamp & Fuse Replacement
Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an
authorized ADJ® service technician. Replacing with anything other than the specified part can dam-
age your unit and will void your manufacturer's warranty.
Warning: If you continue to blow lamps or fuses, STOP using the unit. Contact customer support
for further instructions; you may have to return the unit for servicing. Continuing to use the unit may
cause serious damage.
Fuse Replacement: First unplug the power. The fuse holder is located next to the power connec-
tor. Use a flat-head screw driver to unscrew the fuse holder. Remove the bad fuse and replace with a
new one.
Lamp Replacement: Caution! Never attempt to change the lamp while the fixture is plugged
in. Always disconnect the main power and allow the unit at least 15 minutes to cool before
attempting to replace the lamp. Please see the Important Discharge Lamp Warning section of
this manual for important information regarding the discharge lamp. See Lamp Replacement
section of this manual for lamp replacement instructions. Be sure to follow the proper han-
dling procedures that deal with discharge lamps.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 34