Lamp & Fuse Replacement - ADJ VIZI BEAM RXONE User Manual

Vizi Beam RXONE Lamp & Fuse Replacement
Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an
authorized ADJ® service technician. Replacing with anything other than the specified part can dam-
age your unit and will void your manufacturer's warranty.
Warning: If you continue to blow lamps or fuses, STOP using the unit immediately! Contact custom-
er support for further instructions. The unit may need to be returned for servicing. Continuing to use
the unit may cause serious damage.
Fuse Replacement: First unplug the power. The fuse holder is located next to the power connec-
tion. Using a phillips head screw driver unscrew the fuse holder. Remove the bad fuse and replace
with a new one.
Lamp Replacement: Caution! Never attempt to change the lamp while the fixture is plugged
in. Always disconnect the main power and allow the unit at least 15 minutes to cool before
attempting to replace the lamp. Please see the "Important Discharge Lamp Warnings" sec-
tion of this manual for important information regarding the discharge lamp. See the following
Lamp Replacement section of this manual for detailed lamp replacement instructions. Be sure
to follow the proper handling procedures that deal with discharge lamps.
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE User Manual Page 34