ADJ VIZI BEAM 5RX User Manual page 16

Vizi Beam 5RX
FHRS - Displays the lamp running time, or clear the lamp running time. The lamp running time
needs to be cleared after a new lamp has been installed.
1. Press the MENU button until "FHRS" is displayed, and press ENTER.
2. The lamp running time will now be displayed. Press MENU to exit.
3. To clear the lamp running time, press ENTER when lamp running time is displayed. Either "NO" or
"CLea" will be displayed.
4. Use the UP or DOWN buttons to select "CLea" and press ENTER. Scroll to the password ("50")
and press ENTER. The lamp running time will now be cleared. You should clear the lamp running
time everytime you change the lamp.
LAMP - With this function you can turn the lamp on/off while the unit is still powered on.
1. Press the MENU button until "LAMP" is displayed, and press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to
keep the lamp on at all times, or "OFF" to turn the lamp off while the unit is still powered on.
3. Press ENTER to confirm.
LPND - With this function you can turn the lamp on or off while the power is on.
1. Press the MENU button until "LPND" is displayed, and press ENTER.
2. The display will show either "POOF" (lamp off) or "POON" (lamp on). Press the UP or DOWN but-
tons to select "POON" to keep the lamp on at all times, or "POOF" to turn the lamp off while the
unit is still powered on.
3. Press ENTER to confirm.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until "VER" is displayed, and press ENTER.
2. The display will show the software version.
DEF - Use this function to revert back to the default settings.
1. Press the either the MENU button until "deF" is displayed, and press ENTER.
2. Use the UP and DOWN buttons to toggle between "NO" and "YES." "NO" will keep the unit set
to the current settings, and "YES" will revert the unit to the default factory setting.
RSET - Use this function to reset the unit.
1. Press the MENU button until "RSET" is displayed, and press ENTER.
2. The fixture will now reset.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 16
System Menu