ADJ VIZI BEAM 5RX User Manual page 19

Vizi Beam 5RX
ODNN - Setting adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"odnn" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OCOL - Setting adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"oCoL" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OGOB - Setting adjustment for the gobo wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"oGob" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OPRI - Setting adjustment for the prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"oPrI" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
ORPR - Setting adjustment for the rotating prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"orPr" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OFRO - Setting adjustment for the frost filter.
Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that "oFro"
is displayed. Press ENTER.
Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press
the MENU button for one second to exit.
OFOC - Setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"oFoC" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 19
Offset Menu