ADJ VIZI BEAM 5RX User Manual page 9

Vizi Beam 5RX Mounting
When installing the unit, the trussing or area of installation must be able to hold at least 10 times the
weight of the device without any deformation. The unit must be secured with a secondary safety at-
tachment, such as an appropriate safety cable. Never stand directly below the unit when mounting,
removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installa-
tion material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualifications, do not attempt the installation yourself.
These installation should be checked by a skilled person once a year.
The Vizi Beam 5RX is fully operational in two different mounting positions: hanging upside-down
from a ceiling or set on a flat level surface. To avoid internal damage to the unit, never mount the unit
on its side, as illustrated above.
Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.). Always
use and install an appropriately rated safety cable as a safety measure to prevent accidental damage
and/or injury in the event the clamp fails. Never use the carrying handles for secondary attachment.
NOTICE: The suitable enviromental temperature range for this fixture is -25˚ C to 45˚ C. Do not place
this fixture in an enviroment where the temperatures fall outside of this range. This will allow the fix-
ture to run at its best and help prolong the fixture life.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 9