ADJ VIZI BEAM 5RX User Manual page 10

Vizi Beam 5RX Mounting
Attach one clamp to each Omega holder using an M12 screw and nut. Insert the quick-lock fasten-
ers of the first Omega holder into the respective holes on the bottom of the Vizi Beam 5RX. Tighten
the quick-lock fasteners fully clockwise, then repeat the procedure to install the second Omega
holder. Pull the safety-cable through the openings located on the base plate and over the trussing
system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 10