ADJ VIZI BEAM 5RX User Manual page 18

Vizi Beam 5RX
To enter the Offset Menu, press the ENTER button for at least 3 seconds. In this submenu you are
able to adjust the home position of the pan, tilt, color wheel, gobo wheel, RGobo (Rotating) wheel,
prism, R (Rotating)Prism, and focus position.
OPAN - Adjustment of the pan home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"oPAn" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OTLL - Adjustment of the tilt home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
"otLL" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX User Manual Page 18
Offset Menu