Usb Only User Mode Icons - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
Time presentation in USB only user mode
When the phone has NTP server settings enabled but it cannot connect to the
NTP server in USB only user mode, Konftel 800 does not display time on the
home screen and in the settings menu.
When the phone has NTP server settings disabled, the user can set the time
manually. Then the options of the time presentation are the following:
• On the home screen when there is no active Bluetooth
• On the status bar when the user connects to Konftel 800 using Bluetooth
USB.
Related concepts
Provision of the NTP server address
Firmware upgrade and downgrade

USB only user mode icons

The following table shows the icons on the home screen of Konftel 800 in USB
only user mode:
Icon Name
USB
Connected
Bluetooth
connection
Settings
on page 40
on page 104
Description
To indicate an active USB connection.
The phone displays the
shows USB audio on the idle home screen.
To configure Bluetooth
an active Bluetooth
The phone shows the
Bluetooth® audio indication on the idle home
screen.
If the administrator uses the .xml configuration file
to disable Bluetooth
icon is inactive.
connection
To check and configure the settings from the phone.
View the phone status and reach the menu.
You get access to the settings, which are available
in USB only user mode.
86
® or USB connection.
USB Connected
® Classic settings and to indicate
®
Classic connection.
Bluetooth connection
®
, then the
Bluetooth
®
or
icon and
icon and