Configuring Fips Mode Through The Web Interface; Configuring Fips Mode Using The Configuration File - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
• Log in as the administrator.
• Disable
Allow Legacy Encryption
In the
Settings
Enable
FIPS Mode
Tap the icon three times to return to the home screen.
The phone reboots to apply the changes.
Related concepts
Legacy encryption mode
Standard encryption for 802.1x

Configuring FIPS mode through the web interface

Use this procedure to configure FIPS mode of your Konftel 800 through the web
interface.
• Log in as the administrator.
• Disable
Allow Legacy Encryption
Click .
Phone
In the
Advanced
Click .
Save
The phone reboots to apply the changes.
Related concepts
Legacy encryption mode
Standard encryption for 802.1x

Configuring FIPS mode using the configuration file

Use this procedure to configure FIPS mode of your Konftel 800 using the .xml
configuration file. When you boot the phone after successful provisioning, the
setting file changes, depending on the configuration of the standard encryption
use.
Get the configuration .xml file for Konftel 800.
Open the configuration file.
In the <phone> section, locate <fips_mode> tag and set the value to true.
By default, the value is false.
Save the configuration file.
menu, tap
Phone > Security
.
on page 81
on page 78
section, enable
FIPS Mode
on page 81
on page 78
and EAP MD5 method for 802.1x.
.
and and EAP MD5 method for 802.1x.
.
84