Sleep Mode; Usb Only User Mode - Konftel 800 User Manual

SETTINGS CONFIGURATION AND MANAGEMENT

Sleep mode

Konftel 800 supports Sleep mode feature, which saves power by turning the
screen off after a specified period of inactivity. By default, Sleep mode is in
disabled state.
The phone wakes up from Sleep mode when you do any of the following:
• Touch the screen
• Connect or disconnect the USB cable
• Connect or disconnect the Bluetooth
The phone also wakes up from Sleep mode during screen activity, such as an
incoming call, Konftel Unite connection, or error prompts.
The phone cannot enter Sleep mode during an active call or when it is in music
streaming mode.

USB only user mode

Konftel 800 supports USB only user mode. With this feature, the conference
phone can operate with no SIP account and SIP register configured. In USB only
user mode Konftel 800 acts as a speakerphone that the user can use to conduct
virtual meetings and listen to audio files.
USB and Bluetooth® connection
In USB only user mode, the phone operates as a USB device connected to a USB
host.
In this mode, the phone supports connection to Bluetooth
Bluetooth ® Classic.
When idle, Konftel 800 does not display
USB only user mode. The user can see the phone name and the connection
option as follows:
• When the user connects the phone using USB, Konftel 800 indicates USB
audio on the home screen.
• When the user uses Bluetooth
Bluetooth® audio on the home screen.
• When the user uses both Bluetooth
indicates Bluetooth® audio on the home screen.
USB only user mode icons
The following table shows the icons on the home screen of Konftel 800 in USB
only user mode:
® Classic
Account Name
® to connect the phone, Konftel 800 indicates
® and USB for connection, Konftel 800
35
® devices using
on the home screen in