Enabling Eap Md5 For 802.1X Through The Web Interface; Standard Encryption For Media Encryption With Srtp - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
Tap the icon three times to return to the home screen.
The phone reboots to apply the changes.
Related tasks
Configuring Legacy encryption mode on the phone

Enabling EAP MD5 for 802.1x through the web interface

Use this procedure to configure 802.1x and EAP MD5 method for 802.1x through
the web interface.
• Disable
FIPS Mode
You cannot enable
phone shows the following warning message: EAP MD5 requires FIPS
mode to be disabled.
• Enable
Allow Legacy Encryption
You cannot enable
to do it, the phone shows the following warning message: EAP MD5
requires Allow Legacy Encryption to be enabled.
Log in as the administrator.
Choose the
Network
In the section, enable
802.1x
In the
Username
To activate EAP MD5 method for 802.1x, enable
The section becomes visible.
EAP MD5
In the
Password
Click .
Save
The phone reboots to apply the changes.
Related tasks
Configuring Legacy encryption mode through the web interface

Standard encryption for media encryption with SRTP

When the key exchange for media encryption with SRTP occurs, Konftel 800
supports the AES_256_CM_HMAC_SHA1_80 mandatory crypto.
Some servers do not support this mandatory crypto. In this case you must enable
the
Allow Legacy Encryption
disabled.
.
if
EAP MD5 FIPS Mode
.
if
EAP MD5 Allow Legacy Encryption
tab.
Enable 802.1x
field, enter the user name.
field, enter the password for EAP MD5.
option to make an SRTP call. By default, it is
on page 81
is enabled. If you try to do it, the
.
EAP MD5 Enable
80
is disabled. If you try
.
on page 82