Konftel 800 Installation & Administration page 45

SETTINGS CONFIGURATION AND MANAGEMENT
Name
Media DiffServ
LLDP
Enable
Country Code
Country
Subdivision
County
City
City Division
Block
Street
Description
To specify a value from 0 to 63 to prioritize the media
packets (voice) as a part of the quality of service (QoS)
mechanism.
You can configure this parameter through the web
interface or the .xml configuration file.
To enable and disable specification of the phone location
settings.
Konftel 800 uses Link Layer Discovery Protocol—Media
Endpoint Discovery (LLDP-MED) as a data link protocol to
send information about itself and receive data about other
devices in the same network. You can specify a part of the
parameters if some information is unavailable.
By default, LLDP is enabled after the first boot, factory
reset, and configuration reset.
You can configure LLDP settings only through the web
interface.
To specify the country.
To specify the part of the country.
To specify the county, parish, district, or other applicable
administrative division.
To specify the city.
To specify the city district or area.
To specify the block within the city district.
To specify the street.
45
Table continued...