Firmware Binary; Firmware Metadata File - Konftel 800 Installation & Administration

MAINTENANCE
The following is an example of the certificate configuration file for Konftel 800.
Note that it contains only 2 out of 4 sections.
<certificates>
<ether_8021x>
<ca_uri>8021x_ca.crt</ca_uri>
<ca_hash algo="md5">c49d8fd0cbb6bfc26ef752296d6d17f7</ca_hash>
<cert_uri>8021x_dev.crt</cert_uri>
<cert_hash algo="md5">ca059972d02b2853a92704a7a7640f3f</
cert_hash>
<privkey_uri>8021x_priv.key</privkey_uri>
<privkey_hash algo="md5">f4728d6356204c6fcce91989ef733553</
privkey_hash>
</ether_8021x>
<provisioning>
<ca_uri>prov_ca.crt</ca_uri>
<ca_hash algo="md5">e5116932d3685ea18ead10a55b825145</ca_hash>
</provisioning>
</certificates>
If you enable
Allow Legacy Encryption
contain both MD5 and SHA256 hash algorithms. If you disable
, then only the SHA256 hash algorithm is supported.
Encryption
Related concepts
Legacy encryption mode

Firmware binary

This file contains the firmware binary that is downloaded and installed by Konftel
800 if the metadata file shows that it is newer than the currently installed version.

Firmware metadata file

Firmware metadata file is file in .xml format with information of the firmware
version in the binary file. The file is used to check whether the binary file must be
downloaded to the phone.
• Firmware version
• Filename
• Checksum of the firmware binary
The following is the example of the firmware binary file:
, the certificate configuration file can
on page 81
138
Allow Legacy