Konftel 800 Installation & Administration page 67

SETTINGS CONFIGURATION AND MANAGEMENT
Name
Password
Primary Account
Account Name
User
Registrar
Proxy
Keep Alive
Realm
Authentication
Name
Description
To specify the password used for encryption of the private
key if it is encrypted.
To set the name for the primary account displayed locally on
the screen according to the existing corporate standards.
In USB only user mode the phone does not display the
account name on the home screen in Idle mode.
To set the account or customer name for the primary
account.
To specify the IP address or the FQDN of the SIP server
where the primary account is registered. For example, use
the 10.10.1.100 format for a local SIP server or the
sip.company.net format for a public VoIP service
provider.
To specify the Universal Resource Identifier (URI) of the
proxy server used by the primary account.
To make the phone maintain an active connection to the
network. The options are:
• Yes: If you select this, the phone renews the connection
of the phone primary account to the network.
• No. This is the default setting.
To specify the SIP domain where the SIP authentication of
the primary account with the name and password is valid. If
the field is left blank or marked with an asterisk (*), the
phone responds to any realm. If specified, the phone only
responds to the specific realm when asked for credentials.
To specify the SIP name to use in authentication.
67
Table continued...