Konftel 800 Installation & Administration page 65

SETTINGS CONFIGURATION AND MANAGEMENT
Name
Transport
Transport
Protocol
Source port
TLS
This section is available in the web interface if you choose TLS or SIPS
transport protocol.
TLS Method
Verify Client
Verify Server
Description
To choose one of the following protocols:
• . This is the default setting.
UDP
•
TCP
•
TLS
•
SIPS
Even if you choose TLS, the Konftel 800 still accepts
incoming UDP or TCP signaling.
To optionally specify the local port Konftel 800 will use for
SIP signaling.
To choose the security methods to be applied. The options
are:
•
TLSv1
•
TLSv1.1
• . This is the default setting.
TLSv1.2
To enable or disable
• Yes: The phone activates peer verification for incoming
secure SIP connections.
• No. This is the default setting.
To enable or disable
• Yes: When Konftel 800 is acting as a client for outgoing
connections with secure SIP, it always receives a
certificate from the peer. If you select this, the phone
ends the connection for a non-valid server certificate.
• No. This is the default setting.
. The options are:
Verify Client
. The options are:
Verify Server
65
Table continued...