Konftel 800 Installation & Administration page 33

SETTINGS CONFIGURATION AND MANAGEMENT
Name
Factory Reset
Startup Sound
Time and Region
NTP Enable
NTP Server
Date
Description
To reset the phone to its factory settings. By resetting the
phone to its factory settings, you remove all the
configurations set, imported and installed in course of the
phone use.
You can do the factory reset only if you log in with the
administrator password and only on the phone.
To enable or disable the phone's branded startup sound. By
default, the startup sound is on.
The change of this setting does not require a restart or
reboot of the phone.
To enable or disable the Network Time Protocol (NTP). By
default, NTP is enabled.
You can configure this parameter if you log in with the
administrator password.
To specify the NTP server when NTP is enabled. By default
the phone uses the following NTP server:
0.pool.ntp.org.
You can configure this parameter if you log in with the
administrator password.
To set the current date.
You can set the current date manually only if NTP is in
disabled state.
Specify the date by doing the following:
• Manually enter the date in the field by clicking the day,
month, and year to change the value.
• Select a date from the date picker.
You can use this function only through the web
interface.
33
Table continued...