Sleep Mode; Software; Checking Status; Set Call Forwarding - Konftel 300M User Manual

SETTINGS

SLEEP MODE

It is possible to deactivate the sleep mode.
 Välj > SETTINGS > SLEEP MODE.
Select sleep mode to be ENABLED or DISABLED and confirm by pressing OK.


SOFTWARE

Upgrading
This menu option restarts the Konftel 300M in upgrade mode. See page 27.
Resetting
There is a menu option under SETTINGS that resets all settings to default. Please note
that this also deletes all contacts in the phonebook and all groups saved in the conference
guide.
> SETTINGS > SOFTWARE > FACTORY RESET.
 Select
 Confirm that you really want to reset the settings to default by pressing OK again, or
cancel the resetting procedure by pressing

CHECKING STATUS

If you need to check the software version or serial number.
> STATUS.
 Select

SET CALL FORWARDING

Call forwarding is a service set up by the provider and is linked to the SIM card, not the
phone. You can check the current setting and change it from Konftel 300M by entering a
code according to the table below. Contact your service provider for more information.
Forward service
All calls
If busy
If not answered
If out of reach
Activate
* *
21 [phone number]#
* *
67 [phone number]#
* *
61 [phone number]#
* *
62 [phone number]#
26
.
Cancel Check status
*
#21#
*
#67#
*
#61#
*
#62#
#21#
#67#
#61#
#62#