Usb Only User Mode - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
The phone reboots, if the FIPS mode value differs from the previously
configured value.
Upload the configuration file to the Device Management server or import the
configuration file to the phone using the web interface.
Related tasks
Importing the configuration file
Related information
Configuration file structure

USB ONLY USER MODE

Konftel 800 supports USB only user mode. With this feature, the conference
phone can operate with no SIP account and SIP register configured. In USB only
user mode Konftel 800 acts as a speakerphone that the user can use to conduct
virtual meetings and listen to audio files.
USB and Bluetooth® connection
In USB only user mode, the phone operates as a USB device connected to a USB
host.
In this mode, the phone supports connection to Bluetooth
®
Bluetooth Classic.
The administrator can use the configuration file to disable Bluetooth
button becomes inactive, and if the user taps it, the phone shows
Bluetooth
the following message: Bluetooth is disabled by the
administrator.
When idle, Konftel 800 does not display
USB only user mode. The user can see the phone name and the connection
option as follows:
• When the user connects the phone using USB, Konftel 800 indicates USB
audio on the home screen.
• When the user uses Bluetooth
Bluetooth® audio on the home screen.
• When the user uses both Bluetooth
indicates Bluetooth® audio on the home screen.
on page 125
on page 109
Account Name
® to connect the phone, Konftel 800 indicates
®
and USB for connection, Konftel 800
85
® devices using
® . The
on the home screen in