Konftel 800 Installation & Administration page 32

SETTINGS CONFIGURATION AND MANAGEMENT
Name
Admin Password
Ringtone Level
Key Tone
Reboot Device
Webapp Debug
Daisy Chain
Description
To change the administrator password.
You can configure this parameter if you log in with the
administrator password.
For security reasons, you can change the administrator
password only on the phone.
To choose from six volume levels and a
default setting is
Level 4
If you select
Silent
flash when a call is received.
To enable or disable the key click sound as you tap the
phone screen buttons.
By default, the key tone is on.
To reboot the phone when needed.
You can use this function only through the web
interface.
To enable or disable the debugging function for the web
application. It activates the web application logging available
in the
System Logs
You can use this function only through the web
interface.
To choose a mode, in which your Konftel 800 operates in
case of a daisy chain arrangement. The options are:
• . This is the default setting.
Master
•
Slave
You can configure this parameter on the phone if you
log in with the administrator password. The
administrator can also configure this parameter using
the .xml configuration file.
.
mode, only the green LEDs on the phone
tab. By default,
Webapp Debug
32
mode. The
Silent
is off.
Table continued...