Setting Up A Dhcp Server; Connecting To A Network With Dhcp; Viewing The Ip Address - Konftel 800 Installation & Administration

INITIAL SETUP AND CONFIGURATION

Setting up a DHCP server

Konftel 800 supports any DHCP server software as long as the software is
correctly configured.
Contact your server software vendor to obtain server software installation and
configuration instructions.
Install the DHCP server software according to the server software vendor's
instructions.
Configure the IP address for the phone.
You must configure the required DHCP options to connect to the network with
DHCP.
Related concepts
Network settings description

Connecting to a network with DHCP

Use this procedure to connect to a network with DHCP from your phone or
through the web interface.
• To connect to the network with DHCP from Konftel 800, do the following:
a) Log in as the administrator.
b) Tap
Network
c) Enable
DHCP
d) Tap the icon twice to return to the home screen.
The phone reboots.
• To connect to the network with DHCP through the web interface, do the
following:
a) On the web interface, click
b) Enable
DHCP
c) Click .
Save
The phone reboots.

Viewing the IP address

View the IP address of your Konftel 800. Use this address to log into the web
interface of the conference phone and manage the settings in the device through
the web browser.
On the phone screen, tap
on page 43
.
.
Network
.
Settings
.
.
24