Table of Contents
Advertisement
2.6 Interfaces from C5102-0060
2.6.1 PS/2 connections (X103, X104)
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a PC keyboard can be
connected to the lower PS/2 connector (X103).
2.6.2 USB interfaces USB1 – USB4 (X108, X109, X110, X111)
The four USB interfaces (X108 – X111) are used to connect peripheral devices with USB connections:
▪ Devices with Intel
®
th
4
and 2 USB3.0 (X108, X109) interfaces.
▪ Devices from Intel
®
th
6
interfaces.
Two more USB interfaces (X212 – X213) are located behind the front flap. USB2.0 standard is supported.
2.6.3 Network connection LAN1, LAN2 (X112, X113)
The RJ-45 connectors (X112, X113) allow the PC to be connected to a 100/1000BASE-T Local Area
Network (LAN).
2.6.4 DVI (Digital Visual Interface) (X114, X115)
The DVI connectors (X114, X115) are used for transferring the video signal. DVI-D standard is supported.
2.6.5 Serial interface COM1 (X116)
The basic version of the Industrial PC has one serial interfaces COM1 (X116), using the type RS 232,
which is brought to a 9 pin SUB-D plug connector.
2.6.6 DisplayPort (X117)
The DisplayPort (X117) is used for transferring the video signal.
2.6.7 Sound-On-Board (X120, X121, X122)
The Industrial PC has an on-board-interface with the following connectors: Line In (X122), Line Out
(X121) and Microphone jack (X120).
2.6.8 Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides information about the hardware
configuration of the Industrial PC at the time it was supplied.
C5102
generation processors (C5102-0060) are equipped with 2 USB2.0 (X110, X111)
th
and 7
generation processors (C5102-0070) are equipped with 4 USB3.0
Product Description
11
Advertisement
Table of Contents
