Table of Contents
Advertisement
Product Description
ATX motherboard
interfaces
PS/2
USB1 – USB4
LAN1, LAN2
DVI out
RS 232
COM1
DisplayPort
Sound
Type plate
10
Interfaces from C33xx-0060
PS/2 connections
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a
PC keyboard can be connected to the lower PS/2 connector (X103).
USB interfaces
The four USB interfaces (X108 – X111) are used to connect peripheral
devices with USB connections:
▪ Devices with Intel
®
th
4
with 2 USB2.0 (X110, X111) and 2 USB3.0 (X108, X109) interfaces.
▪ Devices from Intel
®
th
6
equipped with 4 USB3.0 interfaces.
Network connection
The RJ-45 connectors (X112, X113) allow the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
DVI-D (Digital Visual Interface)
The DVI connectors (X114, X115) are used for transferring the video
signal. DVI-D standard is supported.
Serial interface
The basic version of the Industrial PC has one serial interface
COM1 (X116), using the type RS 232. The interface is brought to a 9 pin
SUB-D plug connector.
DisplayPort
The DisplayPort (X117) is used for transferring the video signal.
Sound-On-Board
The Industrial PC has an on-board-interface with the following connectors:
Line In (X122), Line Out (X121) and Microphone jack (X120).
Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
generation processors (C33xx-0060) are equipped
th
and 7
generation processors (C33xx-0070) are
C33xx
Advertisement
Table of Contents
