Troubleshooting Guide - Taylor C820 Original Operating Instructions

Section 7
PROBLEM
1. One side of the grill will not
heat. (The control may or may
not display the message
"FAULTY ELEMENT OR
SHORTED PROBE".)
2. One heat zone will not heat.
(Display reads "TOO COOL".)
3. One of the heat zones is
overheating. (Display reads
"TOO HOT".)
4. The grill will not turn on when
power switch is placed in the
ON position.
5. The upper platen will not stay
in the STANDBY mode, but will
stay in the COOK position.
Model C820 & C822

Troubleshooting Guide

PROBABLE CAUSE
a. The heater is faulty.
b. The high limit switch is faulty.
c. The solid state relay is faulty.
a. The interface board is faulty.
b. The solid state relay is faulty.
c. The control harness is faulty.
a. The interface board is faulty.
b. The solid state relay is faulty.
a. The restaurant circuit breaker
has been tripped.
b. The control cord is not
connected properly.
c. The fuse in the control box is
faulty.
d. The power switch is faulty.
a. Incorrect use of the STANDBY
button.
b. Faulty wire connections.
29
REMEDY
a. Call a service technician.
b. Call a service technician.
c. Call a service technician.
a. Call a service technician.
b. Call a service technician.
c. Call a service technician.
a. Call a service technician.
b. Call a service technician.
a. Reset the circuit breaker.
b. Reconnect the cord.
c. Call a service technician.
d. Call a service technician.
a. Press the STANDBY button
within five seconds of lowering
the platen into the COOK
position.
b. Call a service technician.
Troubleshooting Guide
110419