Taylor C820 Original Operating Instructions page 22

Patty Placement
Placement procedures of meat products must be
followed on the grill. The meat must be placed on
the lower grill surface from front to back. When the
cook cycle is complete, the upper platen will raise.
Patties are generally placed two at a time from front to back of grill and right to left. The removal order of the
patties is shown in the diagrams by the number shown in the center of each patty.
Operating Procedures
Note: It is very important that all patties be
removed from the lower grill surface in the same
sequence that they were placed before cooking.
Patties must be removed immediately after the
upper platen has been raised to the OPEN position
and after the meat has been seasoned.
18
Model C820 & C822