Table of Contents
Advertisement
MULTIPLE TIMING FUNCTIONS: There is one
timing function for clam items and a maximum of
three timing functions for each flat menu item. Each
function has a set of parameters associated with it.
The function currently associated with the menu item
is displayed. Pressing either function 1, function 2,
or function 3 will bring up the next function in the list.
The functions provided are:
S
REMOVE IN
S
TURN IN
S
SEAR IN
ALARM AUTO/MANUAL: This key displays the
current status of the alarm mode. Pressing the key
toggles the mode to the opposite selection.
If ALARM AUTO is selected, the alarm will
automatically stop after five seconds have elapsed.
Selecting ALARM MANUAL requires the operator to
touch either the display screen, the raise button or
the standby button to stop the alarm.
XXX SECONDS: This key displays the time
associated with that menu item in seconds. To
increase or decrease the seconds setting, use the
UP and DOWN arrow keys.
Upon completion of all programming selections,
save the selections by pressing the OK key. To
return to the main display screen without saving the
programming selections, press the X key.
SERVICE CONTACT INFORMATION Key
Press the SERVICE CONTACT INFORMATION key
to view the programmed service contact information.
Figure 25
110603
Operating Procedures
VIEW HELP Key
The View Help key is not functional at this time
(future development).
Loading Store Menu Items To USB
The same USB flash drive that was used to load
software into the grill can be used to perform this
procedure.
Step 1
Remove the USB cable cap from the USB connector
to access the USB port.
Note: Grills built prior to serial number M1035495
will require the front control panel be lowered to
access the control display boards.
Step 2
Insert the USB flash drive into the USB port.
Step 3
Press and hold the PROGRAM key for 5 seconds to
enter the Program Mode.
Step 4
Enter the Operator Password "STORE1". Press the
OK key.
16
Figure 26
Figure 27
Model C820 & C822
Advertisement
Table of Contents
