Taylor C820 Original Operating Instructions page 28

Step 13
Using an approved high temperature grill cleaner,
pour approximately 3 oz. (90 ml) onto each 12" (305
mm) cook zone.
Figure 48
Step 14
Firmly attach the non-abrasive pad to the grill
cleaning pad holder.
IMPORTANT! Use the grill cleaning pad
and holder identified on page 8 ONLY. Using any
other pad and holder will damage the release
sheets.
Step 15
Dip the pad into the grill cleaner.
IMPORTANT: DO NOT SCRUB while applying
grill cleaner in the following steps:
Step 16
Apply grill cleaner to the front side of the upper
platens.
Figure 49
110602
Operating Procedures
DO NOT use metal scrapers, abrasive
pads, screens, or wire brushes. This could result
in damage to the components.
Step 17
Apply grill cleaner to the platen cook surfaces.
Step 18
Apply grill cleaner to the back side of the platens.
Step 19
Apply grill cleaner to the outer edges of the platens.
Step 20
Press the STANDBY button to lower one of the
platens.
Step 21
Apply grill cleaner to the inner edges of the platens.
Step 22
Press the RAISE button to raise the lowered platen.
24
Figure 50
Figure 51
Model C820 & C822