Appendix A: Module Specifications; Network Interface - Digi Connect Wi ME 9210 Hardware Reference Manual

Module Specifications
A

Network Interface

Digi Connect ME 9210
Standard: IEEE 802.3

Physical Layer: 10/100Base-T

Data Rate: 10/100Mbps (auto-sensing)

Mode: Half-duplex and full-duplex

support (auto-sensing)
 Connector: RJ-45
P P E N D I X
Caution: The Digi Connect Wi-ME 9210 embedded modules were designed for 
use in no clean flux wave soldering process. The product is not designed to support
draining after a water-wash process, which can lead to water residue inside the
enclosure resulting from direct entry or condensation after the wash process.
A
Digi Connect Wi-ME 9210
Standard: IEEE 802.11b/g/n

Frequency: 2.4 GHz

 Data Rate: Up to 65 Mbps with automatic fallback
Modulation: CCK (11/5 Mbps), DQPSK (2 Mbps),

DBPSK (1 Mbps), OFDM ((6, 9, 12, 18, 24, 36, 48,
54, and 65 Mbps)
 Transmit Power: 11 Mbps 17dbm
54/65Mbps 12dbm

Receive sensitivity:

1Mbps: -100
2Mbps: -97
5.5Mbps: -96
6Mbps: -84 dbm
6.5Mbps: -79dbm
9Mbps: -84 dbm
11Mbps: -92
12Mbps: -83 dbm
13Mbps: -76dbm
18Mbps: -81 dbm
19.5Mbps: - 74dbm
24Mbps: -79 dbm
 Antenna Connector: 1 x RP-SMA
26Mbps: -71dbm
36Mbps: -76 dbm
39Mbps: -67dbm
48Mbps: -72 dbm
52Mbps: -63dbm
54Mbps: -69 dbm
58.5Mbps: -62dbm
65Mbps: -61dbm
      
3 5