Appendix A Module Specifications; Network Interface - Digi Connect ME Hardware Reference Manual

Module Specifications
A

Network Interface

Digi Connect ME/ME9210
Standard: IEEE 802.3
Physical Layer: 10/100Base-T
Data Rate: 10/100Mbps (auto-sensing)
Mode: Half-duplex and full-duplex support
(auto-sensing)
Connector: RJ-45
P P E N D I X
Caution: The Digi Connect ME and Digi Connect Wi-ME embedded
modules were designed for use in no clean flux wave soldering processes.
The product is not designed to support draining after a water-wash
process, which can lead to water residue inside the enclosure resulting
from direct entry or condensation after the wash process.
A
Digi Connect Wi-ME
Standard: IEEE 802.11b
Frequency: 2.4 GHz
Data Rate: Up to 11 Mbps with automatic fallback
Modulation: CCK (11/5 Mbps), DQPSK (2 Mbps),
DBPSK (1 Mbps)
Transmit Power: 16 dBm typical
Receive sensitivity:
– 1Mbps: -92 dBm
– 2Mbps: -89 dBm
– 5.5Mbps: -87 dBm
– 11Mbps: -82 dBm
Antenna Connector: 1 x RP-SMA
4 6