Digi Connect Wi ME 9210 Hardware Reference Manual page 10

Power and Device Interface Connector Pin Assignments
ME
Pin # Function
13 DCD
14 /RESET
15 +3.3V
16 GND
17, 18 —
19 —
20 /INIT
The development board provides connectors for an optional PoE application kit.
Note:
Any pins not used should be left floating.
Note:
See "Module Pinout" on page 31 for detailed IO configuration information.
Note:
Signal
Wi-ME
Pin # Function
7 DCD
8 /RESET
9 +3.3V
10 GND
11, 12 —
13 —
14 /INIT
Description
Data Carrier Detect (Input)
Reset
Power
Ground
Not accessible with Digi Plug-and-Play
Firmware. If using a development kit, see
"Module Pinout" on page 31 for detailed IO
configuration information.
Reserved. Do not connect.
Software Reset
1 0
      