Control Menu - SGM Q Series User Manual

Control menu

Level 1 Level 2
Mode Select Mode
Test Automated Test
Display Test
Off
Manual Quick Color
Macro Color
Run Program
Stop Program
Editor
Settings Wireless DMX
Service PIN
Service Menu
Factory Default
Fan Mode
Display Saver
Flip Display
DMX Loss
Startup Mode
Info Product Type
Firmware Version
Serial Number
RDM ID
DMX View
Temperatures
Power On Time
LED On Time
Errors
14
Level 3 Level 4
- -
- -
- -
- -
Red -
Green -
Blue -
White -
Full Color Calib. -
Macro Color -
Macro Intensity -
1, 2 or 3 -
- -
Program -
Wireless log off -
Signal strength -
- -
- -
- -
Standard -
Max Power -
Silent -
Display Dim -
Display Off -
Enable -
Disable -
DMX Hold -
Quick Color -
Blackout -
All On -
Select Startup Mode -
Startup Program Select startup program
- -
- -
- -
- -
Up to 504 DMX -
addresses
Mainboard -
LED Left 1 to 4
LED Right 1 to 4
Humidity head
Wireless signal
Wireless paired
Light PWM
Voltage
- -
R1 G1 B1 W1 to -
R8 G8 B8 W8
- -
Function
Select DMX mode.
Initiates a self-test sequence.
Service use only.
Stops test sequence execution.
Static quick color - red mix (0-255). Sets fixture to quick color startup mode.
Static quick color - green mix (0-255). Sets fixture to quick color startup mode.
Static quick color - blue mix (0-255). Sets fixture to quick color startup mode.
Static quick color - white mix (0-255). Sets fixture to quick color startup mode.
Enable / disable color calibration.
Select the Macro Color.
Set the intensity of the selected Macro.
Runs internal sequence 1,2 or 3.
Stops current running internal sequence or Quick Color.
Currently selected program (1, 2 or 3).
Sends Log off command to the CRMX System.
Displays strength of the wireless connection.
-
-
Reset the fixture to factory default settings.
Adjust fan speed relative to internal fixture temperature.
High fan speed for maximum cooling effect.
Low fan speed for quiet operation.
Dims the OLED display when the control panel is not in use.
Turns off the OLED display when the control panel is not in use.
Flips control panel display.
Selects normal control panel display.
Select what happens if the DMX signal is lost.
-
-
Stops test sequence execution.
Displays installed firmware version.
Displays SGM serial#
Displays RDM ID. (Unique RDM ID for identification)
Displays received DMX levels.
Displays fixture temperatures.
Displays LED board temperatures.
Displays the humidity in the head.
Displays the wireless signal strength.
Displays wireless signal status.
Displays light PWM.
Displays PSU voltage.
Displays the total time the fixture has been turned on.
Displays the total time the individual LED segments have been turned on.
Displays errors.